A flexible device supporting about 100 protocols used to collect information from a myriad of devices that use multiple protocols over multiple ports and put all the information in a common format.
Our CPC Gateway™ is a custom protocol converter that works with a long list of protocols and devices to take any standard or proprietary protocol used in industrial communications and translate the data collected into a usable format for communication to maintenance or technical staff or for integration into an overall monitoring system. This genset and engine monitoring gateway can convert data messages, events and commands into the format that fits your needs.
With a list of features that includes user configurable port settings and addresses, modular jacks to prevent wiring errors, and the ability to support over 100 protocols, including well known names such as Allen Bradley, GE Fanuc, Siemens, Modbus, BACnet, CANopen, Schneider, Ethernet IP and Honeywell, our custom protocol converter really does much more. It allows for a set-up that is simple and quick for any qualified technician with basic computer skills, and makes our engine monitoring Gateway stand out from its competitors through its flexibility, ease of use and capabilities.
Monico’s Custom Protocol Gateway is an extremely flexible device with four to six physical ports which can communicate in up to nine protocols simultaneously. It supports an average of 100 protocols, with more being added on a regular basis, and can be used to collect information from a myriad of devices which use multiple protocols over multiple ports and then put all the information in a common, pre-configured data map. It can be used to connect Allen Bradley, GE Fanuc, Siemens, and Schnieder PLC’s into one functional network as well as many other devices.
Available Ports:
We named this product CPC, or Custom Protocol Converter, because of our ability to custom configure it to pull the protocol your equipment uses and convert the pulled data into the protocol you want outputted to your specific monitoring system. Whereas the CDL Gateway and J1939 Gateway communicate through the primary output of CDL or J1939, this Gateway can collect information from an input other than CDL or CAN bus.
AC Tech | Adam | Allen Bradley | Alstom | Automated Direct |
BACnet | Banner Beckhoff ADS | CAN J1939 & CANOpen |
Caterpillar® Data Link | Control Techniques |
Cruisair | CTC | Delta Computer | Devicenet | Dupline |
Ethernet IP | EZ Automation | Festco | FloCom | Garmin NMEA 0183 |
GE | Giddings 7 Lewis | HBM | Honeywell | IDEC |
IFM | IMO | Indramat | Intelligent Actuator | Ircon |
KEB | Keyence | King | Klockner Moeller | KollMorgan 400/600 |
Koyo | Krohne | Lenze | Matsushita | Profibus |
Quicksilver | Red Lion Controls | Rexroth | Schneider | SEW |
Siemens | SSD Drives/Eurotherm | Telemechanique | Toshiba | Unitronics |
Yaskawa | Yokogawa |