
		Home \| About Us \| Info \| Products \| Quotation \| Media Room \| Support \| Contact

Products

CDL Gateway™
	- Modbus
	- Allen-Bradley
	- GE Fanuc
	- Siemens
	- BACnet
CDL Gateway PLUS
CDL Gateway FLEX
CDL Gateway HMI
J1939 Gateway™
	J1939 Gateway PLUS
	J1939 Gateway FLEX
EMCP 3 Gateway
Custom Protocol Gateways
CCM Translators
	- Ethernet
	- Serial

Quote Application Request

CDL Gateway™ - Modbus Protocol Version

The Modbus version of the Monico CDL Gateway™ is a complete solution for any Modbus protocol you will need. With three ports to choose from you will have the right solution for your application in a single unit. If the network architecture changes, you will still have the right product. Since the CDL Gateway™ is a pre-configured product, field setup is minimal and programming is not required.

Beginning 3/31/10, all Gateways are now FLEX models that allow future addition of Input/Output modules.

Available Ports & Protocols

•	Modbus RTU Slave over RS-232 via RJ-11 Jack
•	Modbus RTU Slave over RS-485 via RJ-45 Jack (2-wire or 4-wire)
•	Modbus TCP/IP Slave over Ethernet via RJ-45 Jack

Features Include

•	User configurable port settings and addresses
•	Updates approximately 20-60 parameters per second
•	Allows up to four Masters on Modbus TCP/IP
•	Integral 24 VDC power supply with Din-Rail Mounting
•	Pre-configured register data map
•	Available in Input Registers or Holding Registers

Downloads

CDL Gateway™- Modbus Version Datasheet

CDL Gateway™ Operation Manual

CDL Gateway™ Combined Data Map

CDL Gateway™ Quote/Application Request