Monico CCM Translator-Ethernet Version

Application The Monico CCM Translator is a plug & play protocol converter product which translates CCM protocol to Modbus TCP/IP protocol. It is used in applications where engine data is to be transferred from a CCM to a PLC, CCM to a Man-Machine Interface (MMI), (see Monico MoniTrend product) and from a CCM to remote monitoring devices (see Monico satellite systems). Compatible Engines and Controls 3400B 3500B EMCPII G3520C 16CM 34G G3600 G3400 EIS G3500 EIS G3500AF ADEM II ADEM III ICSM Standard Equipment Translator Hardware & Software. 24 VDC or 110 VAC to 5 VDC power supply. Translator to CCM cables. Inputs 2 serial RS-232 inputs for CCM's. Optional inputs for exhaust temperatures, auxiliary equipment and external processes. Features Automatic CCM detection and configuration. Retrieves all Engine/Generator PIDs for any engine type. Can handle two engines simultaneously. Installation Mount the Translator and power supply in a panel within 50 feet of the CCM. Connect the Translator to CCM. Connect the Host Device (PLC, SCADA or MMI) to Translator Ethernet port and configure the host to accept the appropriate Translator Modbus addresses as shown in the Translator Data Map spreadsheet. Supply 5 VDC power to the Translator. Begin scanning Translator Modbus addresses to receive engine data. Add On Monitoring and Control Equipment Complete analog and digital I/O systems for entire plant monitoring and control solutions. J1939 Translator for protocol conversion to Modbus. SatScada Satellite system for multiple parameter monitoring and internet reporting. MoniTrend Man-Machine Interface for local gathering, trending and historical data archiving. Downloads Manual Ethernet Version CCM Translator-Ethernet Datasheet Modbus Data Map Ethernet Version